The sheath style Vapeciga voopoo vinci is the latest in a series Vinci. Fitter with the term “sheath mod” that Voopoo used for two prior Vinci. The reason is that X is the larger and thicker than the original Vinci and Vinci Vinci R 18650 and 18650 X battery can draw up to 70 watts. This device has a large color screen that is the same, and GENE.AI chip lets you adjust the power and more options.
Vinci Comments are about a month and love, but there are problems impeding give my full recommendation. Namely the filling hole of the lid is very easy to break, poor coil in the package, and reverses when it is used during the connection. Let’s see if Voopoo addressed this issue and if X Vinci worth buying.
Send me a free cost devices Voopoo the purposes of this review.
Price: $ 44.95 (in the element of vaporization)
Color: Aurora, gray sunny room, carbon fiber, red, teal blue ink
Dimensions: 117 mm x 29 mm x 25 mm
Weight: 175 grams
Model Material: Zinc alloy
Output: 5-70 watts
the output voltage: 3.2 to 4.2 volts
Resistance: 0.1 to 3.0 ohms
Battery: One 18650
Pod Capacity: 5.5 ml (TPD 2 ml)
Glove Material: PCTG
1 x apparatus Vinci X
1 x replacement coating Vinci (5.5 ml)
1 x coil PnP-VM1 (0.3 ohm)
1 x coil PnP-VM4 (0.6 ohm)
1 x USB cable
1 x User
Warranty Card x 1
1 x smartcard
quality of construction and design
As for the quality of construction,Vapeciga Voopoo Drag 2 is in the same league as the above Vinci. A device is sturdy and well built, and the extra weight of X because the size is greater and 18650 are the battery to feel better in general. But approx. 175 grams with 18650 Vinci wherein X is heavier than many mods individual batteries. If you want a lightweight, pocket AIO not going to be one, I can say that for you.
Mido Vinci (with pods) of 117 mm by 29 mm by 25 mm. Unlike previous Vinci more clearly on the rise because half the height of a centimeter. There is a small difference in the width, but the device tapers to the width of the sheath.
I was disappointed the last time you received the standard edition carbon fiber, and see TINTA I received today, I was right. The paint job on the device is first rate, and I even like the effects of false texture to go with. And the little touches that work there; buttons have a click and without the satisfaction of a rattle at all, and the battery cover gives the device a pat smooth and uniform appearance and luxurious feel. I was hoping it was one of the battery tray push open because it takes some time to take off and come back, but I got used to after a while.
There is no change in its plastic sleeve, the funnel has an ergonomic shape and contours of your next two options allow airflow. But again, we must be very careful not to break the top of the silicone filler, which is one of my biggest gripes with original Voopoo Vinci show new. I would like to arrange a bit, because I’m pretty sure it’s not convenient for most users. I hope that attention be paid and redrawing the card at a time.
Vinci X works in the same way as the original Vinci, with only minor differences.
Start by opening the screws on the battery cover on the bottom of the unit and insert a fully charged battery 18650 (see our favorite 18650 and be sure to buy one that can handle the power). Then the first coil with five drops of juice and pushed into the boat. Now you can carefully remove the cap (fragile) silicon and gloves filled with e-liquid. Be sure to check the wound in the stomach side to select airflow you prefer the second option DL is limited and there is not much difference between the two, but exceptional. When she finished, giving him a five-minute boat to reel saturated, then click the button to turn the device five shots.
Vinci X will ask you to set the time at that time, used to calculate flashes per day and display the data for 14 days. Unfortunately, time will not be much use to you if an external battery power (as it should) because as soon as you remove the battery from the device. It also seems to take your breath away every day occasions when the batteries, so all things to puff can easily become dirty after a pensioner.
Simultaneously press the shutter button when you’re done, and you will see the home screen of the device. Watt is automatically adjusted according to the coil is used. X rated 70 watts, but no coils are available to take more than 40 watts, maximum watt chip, which is a great feature of the device. Voopoo hope to release the top face of the coil in the future.
The menu is well designed and extremely simple.
Five clicks the button, the need for the device on and off.
Press + or – to adjust watt.
A Pressing the + and – buttons to enter the interface BLAST together.
Pressing the fire – all Resetting the daily number of puffs.
Pressing + and fire together to lock the device (you can withdraw or change watt when locked).
In the press of three buttons at the same time enter the interface clock (you can change the time with the + and -).
Note that these devices are idle when not used for a while, and you have to press the shutter button to wake up. It can be a bit boring after a while, but it was not a big deal. Finally, the GENE.AI chip can be upgraded by Voopoo Too click in. software and download the latest version of the firmware on the website of the company. No updates available at this time, but hope they will start soon.
performance Vinci Voopoo X
The Vinci X comes with two coils in the box:
I covered the 0.3 ohm coils in the head coil and part of the evaluation of the Vinci my performance, but I will comment further after spending much time with him since. This coil is probably what you want if you like a little extra air flow and steam heat. Out of the original coil Vinci bum me happened, all the other coil of 0.3 ohms, tried it reliable. Reel life is not great, but good overall better coil AIO and average in taste and vapor production.
Voopoo decided to replace the regular coils of wire that are included with the coil-PnP original mesh Vinci VM4 0.8 0.6 ohms. I did not know that at first X-Vinci show many similarities with the da Vinci, I’m sure Voopoo initially not shake the coil. Voopoo contact us about it, and after using the coil for three days, it has become my favorite. I’m using 20 mg of nicotine salt and the juice was perfect for this. I do not even feel the need to change the standard 24 watt watts devices are placed in the correct pitch. Do not generate as much steam coil of 0.3 ohms, but the taste is comparable, if not better. And it is also very effective. It took nearly 400 cases blushes empty, and there’s still some juice left in the battery!
As usual 0.8 ohm coil that came with the original Voopoo Drag get code, 0.6 ohm coils renders obsolete in most respects. It could be a little more stringent than 0.6, but certainly not satisfactory MTL, if that’s what you expect. Besides this, it is more prone to flooding and leakage of the other two coils. Use have found more than 20 mg of nicotine salt Vinci original, as a 0.3 ohm coil too strong salt. But now, with a coil of 0.6 ohms works well, there is little need to do a test.
Note that all coils can flood a little if it is not used for some time, especially if the pods are low in juice. It was more of a problem with the coil 0.8, but sometimes with others too. I recommend keeping the sheath least half if possible. Peripheral issues Vinci is the source of most relevant self-launching the device does not support pass through. Moreover, equality activation is an X button option button is enabled only. I truly believe that the activation pattern causes more problems than it solves, so it’s not necessarily a bad thing. Finally, I will not talk about the life of the battery and the load in this review; X 18650 removable take, I recommend using an external charger is not loaded on board.
pros and cons
Great build quality
color edition looks awesome
It may contain 5.5 ml of juice
The screen is bright and easy to read font
soften the thread of the battery cover
Two airflow options depending on how you enter the nacelle
Smart quick shots and accurate genetic
chips autoplay watts
against two weeks may be helpful
Take a 18650
Compatible with five reels PnP
0.3 ohm-coil packs a punch
0.6 Ohm coil are very tasty and good low resistance salt mid-nic
smooth the air flow
Grand and a bit heavy for AIO
easily the silicon broken connection
Go on stand-by if not used for a while
leaks slightly cloves
Time resets each time the battery is removed
Puff eventually be able to remove from the table when the battery is removed
No coils available to go over 40 watts
Pinless activation (button is enabled only)
From the standpoint of performance, Vapeciga Voopoo PNP is a device that can recommend. 0.3 ohm coils tasty and generate a lot of water vapor, and 0.6 ohms achieves a good balance between performance and power consumption, and are perfect for an average nic salt resistance. (Unfortunately, no coils that take advantage of the devices 70 watts, but should arrive soon.)
Meanwhile, X Vinci quite large and heavy unit is now IOA. I find that to be a problem Innokin Z has the same dimensions and heavy sound, and still in my rotation, but maybe every day for some people.
I am very pleased that Voopoo break, which eliminates the problem with me Vinci, although the original tug, it is advisable to charge the batteries in an external charger as well. The residential side, port filler cap is still thin and easily broken. Still I hope that the solution in the future, but I recommend taking a backup in case the pod. The rest of the small weaknesses, and there is a firmware update could not fix. Overall, if you are a good size and weight Vinci X, I say go for it.
You can buy here:Voop[oo https://www.vapeciga.com/collections/voopoo