The small cigarettes are getting hot recently, and there are small cigarettes everywhere, are you tired of watching it? Today, I will give you a different taste, let us reminisce about the big smoke equipment-SMOK MORPH219.
The metal part of the fuselage should be made of zinc alloy, weighing about 147.7 grams, which is relatively light in the dual-electric host. Power range: 1-219W, support 0.1-2.5 ohm resistance. The front of the main unit is a 1.9-inch touch screen. Most of the settings are done by touch. The above is a silver SMOK LOGO. The USB interface is installed at the bottom of the screen. The metal decorative strips resembling parallel four-sided rows make the steady black a touch of agility. The black and red complement each other and make the characteristics of the two sides stronger, which is very subtle and beautiful.
There are two insulated plastic sleeves inside the battery compartment, which can effectively prevent the short circuit caused by the broken skin of the battery, and the inside is very smooth without burrs and will never scratch the battery. The positive and negative signs on the top of the battery compartment are not only large but also distinguished by different colors, showing the style of a big factory in details. Due to the small tolerance of the tube diameter design and the battery, the battery may not be installed smoothly if it is a two-layered battery. Moreover, there is a small difference between the height of the compartment and the height of the battery, so you still need some effort when closing the battery compartment.Jewel tank
The suit is equipped with a TF atomizer with a height of 56mm and a diameter of 30mm. It has a 6ml oil storage capacity under the blessing of the fat bin. The overall color is the same as the main unit, with black as the main tone and red as the decoration. After disassembly, it can be divided into 5 parts, drip nozzle, integrated top cover, glass bin, atomizing core and base. The structure does not seem to be special, but in fact there are some differences.Smok Nord 2
The lower part of the integrated top cover is where the atomization core is installed and can be sealed by the rubber rings on the top and bottom of the atomization core. Since the diameter is much larger than that of the atomization core, there is no need for the oil holes and smoke of the atomization core. The oil will enter the interior from the large oil guide hole, and then be absorbed by the cotton in the atomizing core. The thickness of the two glass chambers is about 1mm, very smooth, without burrs, and very tightly connected with the top cover and the base. There are long air intake holes on both sides of the base. The larger air intake can make the suction resistance lower, and of course it will also bring a larger amount of smoke. The triangular distribution of gold-plated bars inside the base can not only effectively conduct electricity, but also can stably support the atomizing core. Since the structural seal this time is mainly borne by the atomizing core, there is no apron on the base.RPM80 Pro
A smoky and deliberate work, first-class craftsmanship and advanced technology bring simple operation and good taste, making the SMOK MORPH 219 suit a Q-ULTRA Pod more comfortable and safer experience for users, plus a 0.001 second time Extremely fast ignition is a refreshing steam enjoyment. The above is the relevant information of the SMOK MORPH219 set. For more e-cigarette information, please click: smok vaporizers